기기를 수리하세요 커뮤니티 상점

Repair guides and information for the Nintendo Switch Joy-Con controllers.

167 질문 전체 보기

옵션

Replaced joy-con shell; bungled joystick?

I did a shell replacement on my whole Switch, including the body and both joy-cons. Everything went great except for the right joy-con: I must have screwed up the joystick because now it’s permanently sending “joystick right” anytime it’s connected to my unit. The joystick itself looks just fine, it doesn’t look bent. The only thing I can think of is maybe I screwed up the ribbon cable when I plugged it back into the joy-con circuit board.

Has this happened to anybody else? If so, is there a fix? If not, is there a place I can buy a new joystick assembly for the right joy-con?

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 3
댓글 달기

답변 1개

필터:
가장 유용함 가장 최근 가장 오래된
가장 유용한 답변

옵션

I have a similar issue - try lifting the rubber flap that covers the Joystick guts (just under the stick). Then blast some compressed air into here and move stick blast, move stick, blast. See if that helps. Then run the analogue stick configuration from settings.

해당 답변은 도움이 되었습니까?

예 아니요
점수 1

댓글 2개:

How did you get the rubber cap back on? It won't fit in for me.

의

You list it back with two pins it will flap and stay back if done right. A little fiddly but if not you hold while someone else sprays

의

댓글 달기

귀하의 답변을 추가하세요

Ben Kreeger 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 5

7일 전: 6

30일 전: 7

전체 시간: 2,473