주요 콘텐츠로 건너뛰기

2015년 9월 25일 출시. Model A1688/A1633. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 6, 64, 또는 128GB / 은색, 금색, 스페이스 그레이 및 로즈 골드로 제공하였습니다.

2688 질문 전체 보기

TouchiD issues with new iOS?

I am a shop and have repaired 1000's of phones-

Anyone experiencing fingerprint issues with current iOS after screen replacement?

The phone shows no failed touchID message, just doesn't see the finger to scan.

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0

댓글 2개:

Have you updated to 11.0.3?

Have you done a Settings --> General --> Reset --> Reset all settings (NOT ERASE CONTENTS AND SETTINGS)

Thanks for your reply

As I mentioned I’ve repaired 1000’s of phones. I know all about bad home buttons, dirty, or erasing and re-scanning.

The issue was on 3 different phones today all 6s. All normal everyday screen repair. iOS doesn’t show “failed”. It simply doesn’t see the scan. When trying to put a new print in it just sits and waits as if there is no finger on the button.

Current supplier says they have had calls on this issue over the last few days and are looking into it.

Hoping posting here I might get a quicker answer

Thanks again for your input

댓글 달기

답변 1개

When I upgraded to IOS 11 upon release, there was a known issue regarding TouchID that affected my iPhone 6, and I had to delete my saved fingerprints and re-scan my fingers to solve this.

However, it did give me a failed TouchID message when it failed. I would say try to re-scan your fingerprints first, if that doesn't work, there may be an issue with the print scanner in the home button, it could be worth replacing the home button.

Before commencing repairs or taking it to a repair service, make sure you take some basic steps such as cleaning the home button of dirt, grime, etc, and ensuring that both your finger and the button are dry.

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

귀하의 답변을 추가하세요

mazzolagregory 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 211