주요 콘텐츠로 건너뛰기

기기를 고치세요

수리할 권리

부품 & 도구

모델 A1278, 2012년 6월 출시. Turbo Boost가있는 Intel 프로세서, 최대 512 MB DDR5 비디오 RAM

1379 질문 전체 보기

Spill 91% alc/Keybrd replaced/logic board wrks/Pwr bttn still not work

My beautiful A1278 Macbook Pro mid 2012 13" had 91% alcohol spilled on it and it sat in the alcohol, inside a bag, for a day. (I was trying to kill its Ebloa.)

The back panel was taken off and everything was carefully dried as much as possible. (I gave it a blow job with compressed air.) It didn't power up until magsafe charger was plugged in. The inside row of keys did not work (a-row of keys and z-row of keys) and power button did not work.

After a few days, most of the a-row and z-row of keys started working but still no power button. (This whole time the back light on the keys was working but no light for the power button). The only way to turn on mac was to the unplug battery, plug in magsafe charger and then it would turn itself on. **After turning on, I could run the computer on just the battery so it is not that.

Finally replaced the keyboard and to my dismay power button is still not working AND the "i" key and shift key not working. (I am crying inside)

I tried SMC reset, but since the left hand side shift not working, tried right hand shift, nothing. Tried smc reset by unplugging battery and holding power button for 10 sec, didn't work. Annd to double check it is not the logic board I shorted the power pads and it started up.

So if there is a GOD please, please help me find a solution. I cannot keep unplugging and plugging in my battery and hating my life. Thank you.

이 질문에 답하세요 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
의견 추가하세요

LCD iPhone 스크린 수리 키트

평생 품질 보증이 적용되는 저렴한 옵션.

키트 쇼핑하기

LCD iPhone 스크린 수리 키트

수리의 질 말고 비용을 절감하세요.

키트 쇼핑하기

답변 1개

There is a lot of things sorted out on it so I would replace all the bad arts that are having issues and see if you have it back to new!

If you have any question's or concerns please comment below! Thank you

해당 답변은 도움이 되었습니까?

점수 0

댓글:

I'm trying to figure out what the bad parts are. Any suggestions? Don't want to do each piece and turn around and find out I need a whole new logic board and end up paying double to find that out.

의견 추가하세요

귀하의 답변을 추가하십시오

Mirdrewlo 가/이 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 35