해결됨: destoid pads for ipad mini - iPad Mini Wi-Fi

destoid pads for ipad mini

hey i was trying to fix the charging port port from an iPad mini 1 so i tried to desolder the charging port from the logic port and some plastic of the charging port stayed at the pads from charging port i was trying to clean it but 2 pads (the pads for data - +) broke up.. i search the pcb for ipad and i saw that they was under a tiny component that is so difficult to desolder and make jumpers... what can i do pleeasse help me

those pads

댓글 1개

You better take some good photos of it and post them, so we can get a better understanding of what you're talking about.

기존 질문에 이미지 추가하기

George A. 의 2017년 10월 25일

게시일: 2017년 10월 25일

옵션

As George said, we would need a better visual of which pads were pulled to give a suggestion. Here is a pic with Ground pads in Red.

Update: Here are the 5 pads you mentioned and where the jumpers would have to run for each :)

해당 답변은 도움이 되었습니까?

예 아니요

점수 2

댓글 4개:

its very difficult to solder under some components its to tiny like a pencil tip

Κωστας Λαζαριδης 의 2017년 10월 25일

Yes, I agree...it looks like a pretty difficult repair. But if you have a "Micro Pencil" iron, a scope, very small jumper wire and solder mask...It should be repairable.

The Microsoldering Shop 의 2017년 10월 25일

micro pencil?

Κωστας Λαζαριδης 의 2017년 10월 25일

https://www.hakko.com/english/products/h...

The Microsoldering Shop 의 2017년 10월 25일

댓글 달기

iPad Mini Wi-Fi

destoid pads for ipad mini

Update (10/25/2017)

답변 1개

귀하의 답변을 추가하세요