기기를 수리하세요 커뮤니티 상점

GSM iPad 2 with 16, 32, or 64 GB of storage, and a Dual Core A5 Processor. Model Number A1396. Repair is complicated and requires heat and prying.

152 질문 전체 보기

옵션

Digitizer won’t respond to touch after being replaced

I repaired an iPad 2 by replacing a digitizer before peeling back the adhesive strips I tested it. The new digitizer it will not respond to touch. I made sure all of my ribbon cables were connected properly and it still won’t respond to touch.

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 0
댓글 달기

답변 1개

필터:
가장 유용함 가장 최근 가장 오래된
선택된 답변

옵션

Chances are the digitiser is faulty if you tried testing it before installation. As you said you have fully plugged in the digitizer ribbon cable.

해당 답변은 도움이 되었습니까?

예 아니요
점수 2

댓글 1개:

Thank you for your advice. I have solved my problem. I really appreciate your advice in solving my problem.

의

댓글 달기

귀하의 답변을 추가하세요

Pbearbear 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 1

전체 시간: 48