주요 콘텐츠로 건너뛰기

2015년 9월 25일 출시. Model A1687/A1634. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 6, 64, 또는 128GB / 은색, 금색, 스페이스 그레이 및 로즈 골드로 제공하였습니다.

1041 질문 전체 보기

iPhone recognized by Itunes, but shows black screen

So I'm fixing an Iphone that got dropped in water. The liquid indicators are red, but I didn't see much corrosion on the logic board after taking it out and giving it a good alcohol bath.

I ended up replacing both the battery and the screen just trying to get this thing to work. Well I decided to plug the phone into my computer and sure enough Itunes recognized it and said it was in recovery mode.

Now upon trying to restore the phone (I'm not worried about the data on it, just want to get it working again) it gives me an error saying it's unable to restore the phone.

I'm just hoping maybe someone out there sees something I may have missed or that I could try before I give up hope on the phone.

Also I might add that it only shows the ECID and not the serial number while it 's plugged in.

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 1개

check it in 3utools it could be stuck in dfu mode

댓글 달기

답변 2개

선택된 답변

Did you remove the shields on the logic board? Even though you didn't see much corrosion, if the shields were not removed, you don't really know. Additionally, it only takes a tiny amount of water to seep beneath IC's to cause all kinds of issues.

On the surface, your phone seems to have sustained minimal damage. That's good...but there could be latent issues down the road. As @djdannyrock suggest, the phone could be in recovery mode but it may also have a logic board issue that needs to be looked at by a micro-solderer.

해당 답변은 도움이 되었습니까?

점수 2

댓글 1개:

I'll check it with the tools them check the under the shields. Thanks for your help!

댓글 달기

I was writing a long anser for you but happened to delete it..

Check as the one above said.

IPhone 6s plus seems to have alot of problem with the nand when dropped and then they seem dead but can be found in iTunes in dfu mode.

They often get error 4005 when restoring if that's the problem, but as I have read they can successfully restore to. I got one of those at home that seems dead after a drop but no water damage and found in dfu mode and successfully restored buy no image. Screen is ok, i will check the nand on that one.

There's alot of Ytube videos of that problem

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

귀하의 답변을 추가하세요

Repair-IT 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 1

전체 시간: 1,066