주요 콘텐츠로 건너뛰기

2014년 9월 19일에 출시된 이 5.5” 스크린 iPhone은 iPhone 6의 큰 버전입니다.

1534 질문 전체 보기

How to prevent LOCA leak into the backlight

Hi guys,

I still could not find a technique that would work every time to prevent LOCA leak into the backlight. I know already that for some phones you could remove backlight before applying LOCA and put it back again after you finish. But in some cases the risk is too high to remove the backlight because you could damage the LCD.

What is your technique? Have you tried to apply LOCA sealant around the edges where LCD and backlight meet? What about the tape method when you apply tape around each edge? What works best? Thanks!

이 질문에 답하세요 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 1
의견 추가하세요

답변 1개

가장 유용한 답변

It sounds as if you have already named the best ways. Personally, I use to remove the backlight and install new ones since the cost isn't that much, but that is only in the case of refurbishing OEM LCD's when needed. With the prices falling on the LCD's and most knock offs working for the majority... I have just changed to buying the lessor expensive replacement screens unless the customer requests the higher quality LCD and original. I have tried the sealers and tape and it's just too much time and not consistent.

해당 답변은 도움이 되었습니까?

점수 2
의견 추가하세요

귀하의 답변을 추가하십시오

Karolis 가/이 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 3

전체 시간: 140