주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

2011년 상반기 모델, A1278 / 2.3 GHz i5 또는 2.7 GHz i7 프로세서.

829 질문 전체 보기

820-2879 LCD connector shorted now won't power up

Hi, I have an 820-2879 where the LCD connector locking arm shorted out the connector.

I have a green light on charger but no power up. I am trying to learn board repairs so thought a good one to start on.

PP3v42_G3H is at 3.48v but

I'm finding PPBus_G3h on the output of F7040 to be going from 12.8 - 2.8 pause then starts again at 12-8volts and goes down.

I am trying to learn so presume U7000 is what helps produces PPBus_g3h is that correct?

Q7030 has the same irregular voltage on pin 4.

Am I looking down the right line, can I have some help/advice please on where to go next?

Could it also maybe be something trying to turn on then can't hence why it goes back through the voltage cycle.

이 질문에 답하세요 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0

댓글:

@mccltd this is of course after you changed the connector? Best person to let you know would be either @reecee or @tcrs_circuit

Resistance between pins 17/18 and 27/28 of U7000?

의견 추가하세요

답변 1개

You could have shorted something out.

해당 답변은 도움이 되었습니까?

점수 0
의견 추가하세요

귀하의 답변을 추가하십시오

dave 가/이 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 60