주요 콘텐츠로 건너뛰기

6s와 유사한 하드웨어 사양의 4-inch iPhone은 2016년 3월에 출시되었습니다. 16/64GB 저장 옵션 및 은색, 스페이스 그레이, 금색 또는 로즈 골드로 제공됩니다. 모델 A1662 및 A1723.

1049 질문 전체 보기

Smoking battery while replacing. How to deal with it?

Hey guys,

I was replacing the battery of my iPhone SE. The glue bands got cut, so in the process I accidentally punctured the battery several times.

On my ignorance (I underestimated the procedures, I'm terribly sorry about this, never again!!!) I bended a little bit the battery to got access to the glue bands underneath it with the tweezers. So, it flashed out of nowhere and smoked a little bit. I assume the lithium is extremely reactive to humidity, that's why the

At this point, I left the iPhone on the work surface as is, but I truly don't know how to deal with this.

Thanks in advance for your answer, guys!

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

가장 유용한 답변

well you are lucky the phone could have went on fire, realistically I wouldn't have that battery in my house.

once the battery stops smoking you can try again but to be warned you have to be very carful with lithium polymer batteries.

if you have a metal sink id leave it in there or outside. In my tech department we use a safe for punctured batteries so its smothered.

if it feels hot while your working on it put it down. for future reference there are pull tabs on the glue and if you break those usally a low heat hairdryer works to soften the glue before removing the battery.

해당 답변은 도움이 되었습니까?

점수 1
댓글 달기

귀하의 답변을 추가하세요

smarinpavez 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 8

전체 시간: 1,497