주요 콘텐츠로 건너뛰기

Repair guides and support for C/K pickup trucks sold by General Motors under the GMC brand, including the GMC Sierra.

77 질문 전체 보기

Turn signal and running lights don't work

Just recently had a new steering column put in and I've been having problems with the lights shortly after. TS do not come on front and rear along with running lights. TS lights do not come on or show on the dashboard when engaging to signal.. any help would be a blessing

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

선택된 답변

Fuses. Check which fuse controls these circuits and check if its blown, if it is replace it. If it blows instantly, when you got the steering column replaced, one of the wires got pinched and is shorting to ground. If that isnt the case, whoever put the column in probably damaged a wire or didn't plug a connector in during the process, so if thats the case, you should take it back and have the person take a look.

해당 답변은 도움이 되었습니까?

점수 1
댓글 달기

귀하의 답변을 추가하세요

Austen 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 1

전체 시간: 68