기기를 수리하세요 커뮤니티 상점

모델 A1010 or A1104

99 질문 전체 보기

옵션

Why is my new Hard Drive not seen by Disk Utility?

I wish to replace the fully working 120GB HD with the upgrade 320GB WD3200BEVE drive to gain capacity.

When I fit the new blank HD, fresh from WD, and boot from a system DVD, the HD is not seen by System Profiler or Disk Utility.

I have used the same HD cable and this is the second drive with the same problem. If I refit the 120GB HD the machine works as normal.

I have checked for Firmware updates, there don't seem to be any for this machine.

Any advice please?

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 -1
댓글 달기

답변 1개

필터:
가장 유용함 가장 최근 가장 오래된
선택된 답변

옵션

Well I fixed my own problem.

The previous owner was a tinkerer like us, and had fitted an HD ribbon cable which worked with a 120GB HD, but not with a larger drive. It may be faulty, or from another model. When I fitted a different cable 'borrowed' from another PB the new 320GB drive was seen as expected.

해당 답변은 도움이 되었습니까?

예 아니요
점수 2
댓글 달기

귀하의 답변을 추가하세요

Cameron 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 1

전체 시간: 895