기기를 수리하세요 커뮤니티 상점

Second generation of Wi-Fi iPad, released on March 11, 2011. Model number A1395. Repair is difficult and will require heat.

250 질문 전체 보기

옵션

Where does this cable go?

I opened my iPad to replace the digitizer. After opening it, I noticed that one black cable directly on the right side of the home button was loose. For a better idea of what I'm talking about, see pics.

Block Image

Block Image

This cable is loose now and I can't figure out where it was attached.

Also, the iPad does not charge properly anmore. When I plug in the 30pin cable it doesn't recognize that it's being charged. Charging also takes awkwardly long (after 14 hours it got to ~51%) but as I already said, It does not show the charging symbols on the display.

The display on the other hand works perfectly fine. The iPad is still opened up.

Does anyone know where this cable belongs to? Or any other idea why it doesn't charge properly?

Thx in advance.

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 0
댓글 달기

답변 2개

필터:
가장 유용함 가장 최근 가장 오래된
가장 유용한 답변

옵션

WiFi antenna cable.

One end plugs into the WiFi module and the other end is soldered onto a film antenna. If you see it loose, you’ve already cut the antenna off.

해당 답변은 도움이 되었습니까?

예 아니요
점수 3

댓글 2개:

okay thx

But that doesn't explain the charging issues, does it?

Where do I put the end of the cable on/in to?

의

It’s not related to charging. You’ve already cut the cable, so don’t attach it, buy a new one.

의

댓글 달기

옵션

The charging issue is likely related to the dock. It's a super easy component to replace and test with. If that doesn't solve your issue, it could easily be an old battery failing. A little more tedious to repair, but definitely doable.

해당 답변은 도움이 되었습니까?

예 아니요
점수 0
댓글 달기

귀하의 답변을 추가하세요

Kevin K 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 1

전체 시간: 57