기기를 수리하세요 커뮤니티 상점

Apple iPhone 5s는 2013년 9월 10일에 발표되었습니다. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 16, 32, 또는 64GB / 은색, 금색 및 스페이스 그레이.

3530 질문 전체 보기

옵션

Device doesn't switch on after change display

Hi everyone.

Although my research inside other similar issues, I couldn't find an specific case like mine.

So, I've changed the display of an Iphone 5S and after all process be done switched on the device and so far couldn't get out of the appple from very first screen.

This apple remains full time show the device is stacked. Tried to reset the device following a clue given by another member - Nellyson112 - but regretfully didin't work.

So, after all and no solution found, any clue about?

IN time, the home buttom isn't so far so good and needs replacement. Is it a possible reason why the device doesn't start up?

Thanks in advance.

Rgds

Marco

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 1
댓글 달기

답변 2개

필터:
가장 유용함 가장 최근 가장 오래된

옵션

Hey, the homebutton can be the reason for it to not start.

Sometimes the front camera flex needs to disconnect and reconnect. If it was replaced when the screen was, it could be the reason. Then test the first one on rather new screen.

해당 답변은 도움이 되었습니까?

예 아니요
점수 0
댓글 달기

옵션

I'm not sure what you are saying, is the phone getting stuck on apple logo?

Is the home button not working correctly?

해당 답변은 도움이 되었습니까?

예 아니요
점수 0

댓글 2개:

Sorry my absence of clear definitions. Yes, the phone is stuck on initial screen. Home button isn't working properly. By the way, my appologies for another mistake. The owner informed me wrongly about this device. Its a Iphone 5, not 5S. Thanks.

의

Try booting the phone up with home button cable and front camera cable unplugged.

Do you know if the phone was working before the screen was changed?

의

댓글 달기

귀하의 답변을 추가하세요

Marco Bella Rosa 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 1

7일 전: 1

30일 전: 1

전체 시간: 25