해결됨: Pins Under Digitizer Bent/ scraped off - iPhone 6s Plus

Pins Under Digitizer Bent/ scraped off

Hello, I’m afraid something may be screwed up on an iPhone 6S Plus I am working on. I belive that this is the second time the screen needed replaced on this specific phone- the first time I am doing it though. The pins right beneath the digitizer seem to be scraped away from something- I noticed this after I tried to install the new display, and then I tried the first display. The first display did work before I removed it. The photo I included isn’t exactally the best. Is there anything I can do?

Thank you!

게시일: 2018년 1월 25일

옵션

It looks like the connectors for the digitizer are fine on the logic board, have you tried plugging a screen in?

해당 답변은 도움이 되었습니까?

예 아니요

점수 2

댓글 3개:

I have tried 3 screens- each produces video, just no capacitive touch. My fear is that I peeled some adhesive from around the digitizer connector and now the pins seem to be missing. I would try to get a better photo but I’m not sure I can with this iPhone.

Danny Dorazio 의 2018년 1월 25일

Oh, the adhesive isn't the issue here. You have knocked a bunch of small SMD components right under the digitizer connector.

Micro-soldering is required to fix this here. Maybe you will find someone that does micro soldering in your area to replace the missing or damaged components.

Ben 의 2018년 1월 25일

Okay thanks for your help!

Danny Dorazio 의 2018년 1월 26일

댓글 달기

iPhone 6s Plus

Pins Under Digitizer Bent/ scraped off

답변 1개

귀하의 답변을 추가하세요