주요 콘텐츠로 건너뛰기

Can I fix a severed hold switch ribbon?

When replacing the battery on my iPod the battery was so stuck with the adhesive, that when it finally came loose, I severed the orange ribbon cable that goes to the hold switch. As such the iPod thinks it's eternally on hold. Can I fix it?

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 2
댓글 달기

답변 2개

가장 유용한 답변

The ribbon cables are so small and delicate that repairing the ribbon itself isn't really an option. However, replacing the headphone jack/hold switch assembly (30 GB or 60/80 GB) is an inexpensive and easy repair. (If you successfully replaced the battery, this will be easy as well for you).

Good luck!

해당 답변은 도움이 되었습니까?

점수 2

댓글:

replacing the hold switch/headphone jack would be your best bet!

댓글 달기

You could snip the cable to add a finer cut, but this would not let the ipod go into hold, just turn on, and stay on

해당 답변은 도움이 되었습니까?

점수 1
댓글 달기

귀하의 답변을 추가하세요

gary 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 2

30일 전: 2

전체 시간: 4,146