주요 콘텐츠로 건너뛰기

The Samsung Galaxy Tab Pro 12.2 is a powerhouse that can handle tasks such as Multi Window with ease.

28 질문 전체 보기

Installed new power port and Tablet won't turn on, why?

We changed the power charging port following your directions. Great install instructions and no problems. Tablet displayed large green android icon and message "downloading, don't turn off target device." In upper left, displayed message regarding "odin mode." After looking for the answer to that situation, we allowed the battery to completely discharge, then recharged to 100%. Tried holding the power and volume simultaneously. No luck. Still won't reboot and only image now is the full battery. Do you have any suggestions?

답변되었습니다! View the answer 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
의견 추가하세요

PC 노트북 배터리

큰 전력 향상을 위한 손쉬운 수리.

지금 장보기

PC 노트북 배터리

큰 전력 향상을 위한 손쉬운 수리.

지금 장보기

1개의 답변

선택된 해법

why did you let the battery discharge when it was only in odin mode, you only had to hold the power button down to turn it off and turn it back on, it would only download if you were trying to reinstall the firmware. try disconnecting the battery and reconnecting it

Update (01/31/2018)

this guide will show you how to disconnect and reconnect

Samsung Galaxy Tab Pro 12.2 Battery Replacement

해당 답변은 도움이 되었습니까?

점수 0

댓글:

We replaced a bad power port. "Odin problem" began after we installed the port. The" hold power button" and other button combinations didn't work. We tried letting the battery discharge instead of removing/disconnecting it. How do you disconnect the battery?

의 답변

의견 추가하세요

귀하의 답변을 추가하십시오

Roni 가/이 대단히 고마워 할 것입니다.
조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 8

전체 시간: 214