주요 콘텐츠로 건너뛰기

2015년 9월 25일 출시. Model A1687/A1634. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 6, 64, 또는 128GB / 은색, 금색, 스페이스 그레이 및 로즈 골드로 제공하였습니다.

1041 질문 전체 보기

Screen goes dark during phone calls after replacement. Help!

iPhone 6s plus, I replace a cracked screen by purchasing the aftermarket kit from ifixit. The repair went without a hitch since I was following the disassembly guide. The replacement screen displays the correct colors and is perfect.

However, during calls, the screen goes dark as if the sensor on the very top of the screen is being blocked. Did I do something wrong or is my replacement unit the issue?

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 1
댓글 달기

답변 2개

선택된 답변

You may have damaged or incorrectly installed the Front Camera/Sensor flex, which contains the proximity sensor. You should go back through this guide to double check your work.

해당 답변은 도움이 되었습니까?

점수 3
댓글 달기

Have either of you installed a screen protector or left the plastic protection on that came with the new screen? If so try removing it.

해당 답변은 도움이 되었습니까?

점수 0

댓글 1개:

There is no screen protector on it and t he plastic protection has been removed.

댓글 달기

귀하의 답변을 추가하세요

Riannon Webb 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 85