주요 콘텐츠로 건너뛰기

2015년 9월 25일 출시. Model A1687/A1634. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 6, 64, 또는 128GB / 은색, 금색, 스페이스 그레이 및 로즈 골드로 제공하였습니다.

1041 질문 전체 보기

Top Left Wifi Antenna cable repair

I was repairing an iPhone 6s plus with a cracked screen and sticky power button. While putting the logic board back in after fixing the power button I was attempting to put the top left antenna cable back in place when I noticed it was suddenly more loose. After looking over it I noticed the wire leading into the connector had come out.

After looking in the store and seeing the antenna is currently out of stock and I have a customer expecting a phone tomorrow I thought I would try my luck here. Other than getting lucky and find one somewhere else to buy, is there any tricks I could use to re attach the wire to the connector?

I don't currently have a micro-solder kit, so hopefully that's not my answer. Any insight by someone with this kind of experience would be very greatly appreciated. Thanks!

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

선택된 답변

It has to be re-soldered if you want a proper connection.

해당 답변은 도움이 되었습니까?

점수 2

댓글 1개:

This may be me over thinking it, but soldering a wifi antenna wouldn't cause any interference or problems with the phone would it?

댓글 달기

귀하의 답변을 추가하세요

Repair-IT 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 1

전체 시간: 115