주요 콘텐츠로 건너뛰기

The ZTE ZMax Pro is identified by its black color, rear fingerprint sensor and its model name, Z981, which can be found under the rear case.

133 질문 전체 보기

What's causing my charger not to keep connected

When I plug the charger in I have to wiggle it for it to start charging. Sometimes it flickers on and off and sometimes it doesn't charge . Is it the cord is it the phones connection port? How do I check it, how can I fix it?

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 1
댓글 1개

Thank you everyone! It was the cord

댓글 달기

답변 3개

선택된 답변

Hi @gili4 ,

Use a strong light and a magnifying glass to check that the micro USB charging port enclosure hasn't got lint or dust trapped in it.

If it has, DO NOT use a metal probe to remove the debris. Use a vacuum cleaner to try and suck it out. If it refuses to dislodge, try gently using a wooden toothpick.

Also check that the 5 pins in the port are all there, are of the same length and are straight and parallel with each other.

You can also check if the USB port "feels" lose at all, indicating that it may be partially disconnected from the systemboard. To do this, plug the cable into the phone only. Then hold the phone firmly and gently (stress very gently)try to move the plug of the cable either sideways or up and down in the port enclosure and see if you can detect any movement at all in the port.

해당 답변은 도움이 되었습니까?

점수 2

댓글 1개:

TY I really appreciate your help.

댓글 달기

It is most likely the cord. How long have you had this cord for? Is it the original cord that came with the phone?

해당 답변은 도움이 되었습니까?

점수 1

댓글 1개:

Phone's 6 months old. Wasn't connecting in car. Home was fine. Now neither work well

댓글 달기

It’s definitely the chord when you start putting it in your pocket and moving it around a lot the chord starts to fray on the inside and it looses connection. Time to buy a new chord.

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

귀하의 답변을 추가하세요

Gregory S Cordy 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 2

전체 시간: 998