주요 콘텐츠로 건너뛰기

Apple iPhone 5s는 2013년 9월 10일에 발표되었습니다. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 16, 32, 또는 64GB / 은색, 금색 및 스페이스 그레이.

3531 질문 전체 보기

Screen not responding after new screen replacement

My screen has been working fine for the year I had it then the other couple days I've noticed white lines on my screen but it still worked fine just yesterday it started acting buggy and slow and uunresponsive so I took it apart and reseated the digitizer without hard pressure at all and then it just continued to have crazy colorered lines sometimes the screen was completely black yes I disconnected the battery every time but I just put my new screen in and no lines but the first time the touch screen was barely responsive it moved one notification but barely but it just isn't responding. Also I connected the home button and it isn't working either. I need help I don't think I damaged anything

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 2개

가장 유용한 답변

I'm going to take a guess that the replacement screen is defective, very rarely a 5s will have touch issues being caused by the logic board.

Unless the touch screen connector is damaged or has liquid damage / corrosion near it you can check this by removing the black sticker that is around the screen connectors on the logic board.

해당 답변은 도움이 되었습니까?

점수 1

댓글 2개:

I Was able to get it to work after 30 %#*@ tries of seating it correctly but my home button stil doesn’t work I connected it but it still won’t work

Home button issue can be caused by two things:

Connector on the home button connector being damaged, in this case charging port assembly would need to be replaced.

A tear in the home button cable itself, which would mean home button needing replacement and resulting in no touch id.

댓글 달기

Hello I am not sure what is the problem but you can try to connect the I phone into a lap top. Then try to set it for I phone recovery mode. Then try to reset the I phone from the laptop. If that dose not work call Apple and I think they may be able to reset the scream and device if wirelessly. Good luck and hopefully it will work

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

귀하의 답변을 추가하세요

dj holley 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 606