I have a Kenwood DNX6190HD that will not power on. Please HELP!

I connect the power to the unit but when I push the power on button nothing happens. As it appears this is a very common problem with these units. I tried youtube to find a probable cause or if someone has encountered this problem before and hopefully can shed some light into solving it. On one of the suggested videos I saw ifixit provides help. I am not sure why or how I didnt know about your site. As if I was living under a rock for the last few years. Well, back to the issue. I know there is power going into the unit but the screen wont turn on. Please HELP!

해당 질문 답변하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 1

댓글:

Hi,

Have you checked ALL the connections, both power feeds ('accessory' power and permanent power,the earth, as well as the speakers? Also the fuse in the unit.

의 답변

의견 추가하세요