평판: 25
1
1
teeth on lower roll insert that can interfere with teeth on the housing. My brush roll will not turn when re-installed. It installs easily, powers up, spins about 4-5 revolutions, then shuts off power for a second, then comes back on without roller spinning at all. I can see it is the teeth interlocking but don't know how long it makes the first 4 or 5 revs.
좋은 질문 입니까?
평판: 685.2k
3.4k
1.1k
2.6k
Pull the roller and examine it and see if the cogs are worn. Jere’s how:
해당 답변은 도움이 되었습니까?
24 시간 전: 0
7일 전: 1
30일 전: 3
전체 시간: 4,348
댓글 2개
Did you find a solution?
Dave Duddleston 의
my roller will not turn on my v6 dyson but a new roller will do i have a problem with the old roller or is the problem with the cogs that turn the roller?
Jennifer Bard 의