Repair guides and support for C/K pickup trucks sold by General Motors under the GMC brand, including the GMC Sierra.
Matthew Wayne Aitken @maitken81
평판: 1
1
게시일: 2018년 3월 19일
While running rpm gauge will sometime get jumpy and the engine will stall when i push on the gas n sometime cut out
좋은 질문 입니까?
댓글 8개:
Hi @maitken81 ,
Get the OBDII port scanned for error codes. This is the quickest way to find out what is going on in the engine.
AutoZone in the USA will do this for free apparently.
jayeff 의 2018년 3월 20일
Its showing no codes
Matthew Wayne Aitken 의 2018년 3월 20일
@maitken81 what year is is, what model, what engine? What have you checked? Does this "running rpm gauge will sometime get jumpy and the engine will stall " always happen together?
oldturkey03 의 2018년 3월 20일
Yes it happins together when its jumping if i push gas it stalls n sputter
Its a 95 gmc sierra 1500. Tbi it has the 5.7 liter
I have swapped speed sensor thermostat pcv valve
댓글 3개 더보기
24 시간 전: 0
7일 전: 0
30일 전: 0
전체 시간: 1,969
Hi @maitken81 ,
Get the OBDII port scanned for error codes. This is the quickest way to find out what is going on in the engine.
AutoZone in the USA will do this for free apparently.
jayeff 의
Its showing no codes
Matthew Wayne Aitken 의
@maitken81 what year is is, what model, what engine? What have you checked? Does this "running rpm gauge will sometime get jumpy and the engine will stall " always happen together?
oldturkey03 의
Yes it happins together when its jumping if i push gas it stalls n sputter
Its a 95 gmc sierra 1500. Tbi it has the 5.7 liter
Matthew Wayne Aitken 의
I have swapped speed sensor thermostat pcv valve
Matthew Wayne Aitken 의
댓글 3개 더보기