평판: 261
3
5
replaced the lcd and glass, customer brought it back with ghost touching and also after time the ipad wouldnt react when touching the screen. placed kapton tape on the glass and still the same issue. i have tried sliding the screen by just touching the lcd but no luck, does it need a new lcd? or will the lcd not react anyways when touching?
좋은 질문 입니까?
평판: 4.3k
19
20
22
This sounds like more of an issue with the digitizer glass/assembly. I'd recommend looking into reseating the cables for the digitizer and making sure no debris are in between the digitizer and the LCD. If not, you might need to look into a new digitizer. Good luck!
해당 답변은 도움이 되었습니까?
24 시간 전: 0
7일 전: 0
30일 전: 1
전체 시간: 133
댓글 1개
the touch only works if you touch the glass. The LCD is just that, an LCD to view images.
As the companion says, the problem is in the tactile crystal. Sometime I happen that after changing the screen, the touch stops working a while later. Phantom touch seconds the motion, bad touch screen.
Oscar 의