주요 콘텐츠로 건너뛰기

모델 A1297 Unibody: 2009 상반기, 2009 중반기, 2010 중반기, 2011 상반기 & 2011 하반기

544 질문 전체 보기

Blown up mosfet next to the C7771 capacitor 820-2610-A

Hi, I want to change the component which is right beside C7771, which reference on the motherboard is Q7953.

_______________________________________

On the schematic, i can see these references:

SI7108DN

PWRPK-1212-8-HF

(APN 376S0651) ==> not sure about this one

MOSFET SI7108DN

CHANNEL N-TYPE

RDS (ON) 5 mOhm @4.5V

LOADING 5.1 A (EDP)

_______________________________________

I am looking to buy a new one, but all i can find is this:

SI7108DN-T1-E3 or SI7108DN-T1-GE3

which has 0.0061 ohm at VGS = 4.5 V , and not 0,005 ohm. BUT VDS = 20 V ( info found in datasheet)

https://www.mouser.fr/ProductDetail/Vish...

My question is, does the component work for my motherboard? which one of the two?

Or neither, and could you please redirect me to where i can buy my

SI7108DN

POWERPACK-1212-8-HF???

Thanks a lot!!!

_______________________________________

Here is the full scheme and openboardview file to see yourselves the details

http://www.mediafire.com/file/mao99ejro8...

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 1개

@oldturkey03 - Your better at this than me. Any ideas??

댓글 달기

답변 1개

선택된 답변

@yanndetrie that will be okay. The RDs is a max of 0.0061Ohm (6.1mOhm) with a typical of 0.005 Ohm (5mOhm)

해당 답변은 도움이 되었습니까?

점수 3

댓글 3개:

Thanks, but what about the loading part 5,1 A part please?

https://www.ebay.fr/itm/MOSFET-N-CH-20V-...

Would this be the good part?

I can see the same here:

@yanndetrie yes that looks like it will work.

댓글 달기

귀하의 답변을 추가하세요

yanndetrie 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 380