주요 콘텐츠로 건너뛰기

Repair guides and information for the HP 250 G3, a budget laptop released by HP in 2014.

24 질문 전체 보기

power button not working for booting.. but opening lid does?

My HP250 power button won't turn it on but instead works for forced shutdown or hibernation/sleep purposes only. the only way I'm able to switch on the laptop is to remove all power sources that being the battery or adapter cable then after I would close the lid and place back battery or adapter cable, when I open the lid that's when the laptop boots into windows. I have also resorted to force shut it down because every time after shutdown it automatically restarts.

what could be the cause of this ?

I have already tried a couple of those electrostatic discharge methods for the power button to work.

이 질문에 답하세요 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
의견 추가하세요

답변 1개

Try to reset Bios to factory default, and then make a bios upgrade...

If not help then , is a good chance that might be a hardware failure, may a bad small capacitor....

해당 답변은 도움이 되었습니까?

점수 0
의견 추가하세요

귀하의 답변을 추가하십시오

arnold charamba 가/이 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 3

전체 시간: 424