Boots to grey screen with vertical bars

Question

iMac Intel 24" EMC 2134 및 2211

모델 A1225 / Mid 2007 and Early 2008 / 2.4, 2.8, 또는 3.06 GHz Core 2 Duo 프로세서

433 질문 전체 보기

Jurgen @jurgenkoppen

평판: 627

8

13

1

게시일: 2018년 4월 7일

옵션

Boots to grey screen with vertical bars

Boots to only to apple logo then grey screen with vertical bars in grey, white and black. However, it does boot all the way to desktop in Safe mode, still has the bars on right side however. AHT, even the extended one, said "no problems found". External monitor shows the same vertical stripes (however, on the left side of the screen!) I am ready to take out the GE Force 8800 GS and do the fix, if you say this is likely my issue. Can you please advise me on 1) is it my graphics card? and 2) how exactly to do the reflow of solder with the hardware Mayer reference from Ebay ?

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요

점수 1

댓글 2개

How about pasting a few images of the screen and the external display so we can make sure. 기존 질문에 이미지 추가하기

Dan 의 2018년 4월 7일

Here is what it looks like when I boot in safe mode. The external monitor does not show any icons and has the stripes on the left side..... [image|1399019][image|1399020][image|1399021]

Jurgen 의 2018년 4월 7일

댓글 달기

답변 2개

선택된 답변

Dan @danj

평판: 478.9k

Self employed contract worker

35

329

970

게시일: 2018년 4월 7일

옵션

From way you've stated it does sound like your GPU card is failing. Here's the part info for the replacement part. Bars tend to be bad Video RAM so you'll likely need a new board

2007 24” iMac Video card
- 661-4426 ATI Radeon HD 2600 Pro, 256 MB
Early 2008 24” iMac Video Cards
- 661-4663 MXM III, M76XT+/256MB GDDR3
- 661-4664 MXM III, G92GT+/512MB GDDR3 (CTO)

We don't have IFIXIT guide for your system, but this one will get you there: iMac Intel 24" EMC 2111 GPU Assembly Replacement

You'll need a good thermal paste for the GPU and you'll need thermal pads for the RAM chips after you fully clean the old thermal paste & pads when you re-mount the heat sink.

해당 답변은 도움이 되었습니까?

예 아니요

점수 2

댓글 11개:

May be a candidate for a GPU reflow.

mayer 의 2018년 4월 7일

@mayer - I'm suspecting the VRAM is gone here Vs the GPU its self.

Dan 의 2018년 4월 7일

Thank you guys, I just bought the equipment Mayer suggested in a similar post, to try the reflow, and watched the appropriate videos on youtube. Since I can boot in Safe mode I know that this machine has the N-Vidia Ge Force 8800 GS with 512 MB RAM. Thank you for your insights. To replece the video card is about $300 , but there are also repair service on Ebay who can do a pro job for CAN$150 So I figure I will try the reflow first, since I want to eventually be able to fix this stuff all on my desk. Dan , does your last comment mean that a reflow will not be enough, if the VRAM is "gone" ....or come unsoldered?

Jurgen 의 2018년 4월 7일

Also exactly what thermal paste should I buy? There seem to be two different kinds being uses, a white and a grey?

Jurgen 의 2018년 4월 7일

Yes! Apple later on used a gapping paste (white) on the VRAM chips and uses a normal TIM on the GPU. Here's the products I use: [연계 제품이 누락 또는 비활성화 됨: IF179-010] & Arctic Silver ArctiClean to fully clean the heat sink & chips.

For thermal pads I use:

- Conductive Silicone Thermal Pad 0.5mm

- Conductive Silicone Thermal Pad 1.0mm

- Conductive Silicone Thermal Pad 1.5mm

I use a feeler gage to size the gap and use the size thats slightly snug.

Dan 의 2018년 4월 8일

댓글 6개 더보기

댓글 달기

How about pasting a few images of the screen and the external display so we can make sure. 기존 질문에 이미지 추가하기 — Dan
Here is what it looks like when I boot in safe mode. The external monitor does not show any icons and has the stripes on the left side..... [image|1399019][image|1399020][image|1399021] — Jurgen
@mayer - I'm suspecting the VRAM is gone here Vs the GPU its self. — Dan
Thank you guys, I just bought the equipment Mayer suggested in a similar post, to try the reflow, and watched the appropriate videos on youtube. Since I can boot in Safe mode I know that this machine has the N-Vidia Ge Force 8800 GS with 512 MB RAM. Thank you for your insights. To replece the video card is about $300 , but there are also repair service on Ebay who can do a pro job for CAN$150 So I figure I will try the reflow first, since I want to eventually be able to fix this stuff all on my desk. Dan , does your last comment mean that a reflow will not be enough, if the VRAM is "gone" ....or come unsoldered? — Jurgen
Also exactly what thermal paste should I buy? There seem to be two different kinds being uses, a white and a grey? — Jurgen
Yes! Apple later on used a gapping paste (white) on the VRAM chips and uses a normal TIM on the GPU. Here's the products I use: [연계 제품이 누락 또는 비활성화 됨: IF179-010] & Arctic Silver ArctiClean to fully clean the heat sink & chips.

For thermal pads I use:

- Conductive Silicone Thermal Pad 0.5mm

- Conductive Silicone Thermal Pad 1.0mm

- Conductive Silicone Thermal Pad 1.5mm

I use a feeler gage to size the gap and use the size thats slightly snug. — Dan

Jurgen @jurgenkoppen 평판: 627 8 13 1 · Answer 1 · 2018-05-19T19:35:48-07:00

Jurgen @jurgenkoppen

평판: 627

8

13

1

게시일: 2018년 5월 19일

옵션

OK, my GPU came back from "reballing"( $US 70) and now it is completely kaputt. Lesson learned. Reballing without chip replacement is a waste of money on these this GPUs. The 8800GS is a time bomb, no more, no less. Who wants my smoldering remains of a 24" 2008 iMac?

해당 답변은 도움이 되었습니까?

예 아니요

점수 0

댓글 4개:

@jurgenkoppen sorry to hear this. Yup, your analyses is complete correct. Unless you repalce the actual "chip" there is no way a reball will fix it. Anyhow, consider the 2nd "R" for reuse and keep your panel. Get universal driver for it so you can at least use it as an external monitor. Keep's with the spirit of iFixit to keep stuff out of the landfill.

oldturkey03 의 2018년 5월 20일

@oldturkey03 , thank you for your note. And you are right of course, I do want to make maximum use out of the wreckage. Can you tell me more about the universal driver? Between your website here, and Louis Rossmann's videos , I have become so inspired to become a Mac techy that my room turned slowly into a lab with microscopes and solder equipment. Fixed about a dozen "vintage" machines, and loving it. Thank you all for your most excellent advise and energy....cheers, J

Jurgen 의 2018년 5월 21일

@jurgenkoppen take a look at this question/answer. It is not very difficult but as a monitor those things can kick butt

Can I Mod an early 2009 24" iMac to external monitor?

oldturkey03 의 2018년 5월 21일

@oldturkey03 , very cool!!!! Thank you so much, I now have something to explore...

Jurgen 의 2018년 5월 21일

댓글 달기

iMac Intel 24" EMC 2134 및 2211

Boots to grey screen with vertical bars

답변 2개

귀하의 답변을 추가하세요