기기를 수리하세요 커뮤니티 상점

Device and repair information for the 60" LED HD TV by Samsung released in 2013, model number UN60FH6003FXZA.

203 질문 전체 보기

옵션

UN65EH6000FXZA YH02 strobe backlights

Block Image

Block Image

Block Image

UN65EH6000FXZA YH02

I have a Samsung UN65EH6000FXZA YH02. The backlights strobe I get no sound no standby light or noise. I have replaced the main power board and get the same thing. When I disconnect the control and tcon board and just have thebacklights connected I get the strobing backlights still. But when I disconnect the back light and just have the control and tcon board connected to the board I get the standby light and it makes the start up noise. Do anybody have an i dea what is causing this and the part number i would need to fix it?

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 0
댓글 달기

답변 1개

필터:
가장 유용함 가장 최근 가장 오래된

옵션

jaded past "When I disconnect the control and tcon board and just have thebacklights connected I get the strobing backlights still." sounds like a failed backlight array or a bad power board. Post some images of all of your boards so that we can see what you see. Use this guide 기존 질문에 이미지 추가하기 for that. You can measure the voltage on the led connector to see if the "strobe" originates there. If not then you know it is most likely the array.

해당 답변은 도움이 되었습니까?

예 아니요
점수 0

댓글 1개:

How would I measure the voltage I honestly have never done that before. Tv powered on or off? Give me the steps and I can get it done and post my results. And again that is a brand new power board.

의

댓글 달기

귀하의 답변을 추가하세요

jaded past 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 1

전체 시간: 205