주요 콘텐츠로 건너뛰기

원래 PowerMac G3의 뒤를 이어 1999년에 출시되었습니다, 300-450 MHz, 64 또는 128 MB RAM, 6 또는 12 GB HDD

18 질문 전체 보기

Powermac G3 Hard Drive won't format for tiger installation

so, recent;y, i got a bigger hard drive for my powermac g3(10GB to 80GB) but when i enter disk utility, and do to the drive to format it, is starts, shows the status bar, and never makes it past 1/20 of the way there, disk utility never freezes, but after letting it attempt to format all night, it never made any progress, the computer isn't frozen, and the drive is good, but it won't format, I have also tried changing the jumper with no luck, any ideas?

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 2
댓글 달기

답변 2개

선택된 답변

Do you know if you've got a rev1 or rev2 B&W, if you've got a rev1 then the HD controllers aren't very stable and it could be it isn't compatible with your new drive.

There's a bit more info on the lowendmac site

http://www.lowendmac.com/ppc/blue-white-...

the rev2 have an IDE controller marked 402, which I think is down near the IDE plug, not 100% as our rev2 is a plane journey away, few years since I worked on it.

해당 답변은 도움이 되었습니까?

점수 2
댓글 달기

PowerMac G3 Blue and White can only support up to a 12 GB HDD

해당 답변은 도움이 되었습니까?

점수 -1
댓글 달기

귀하의 답변을 추가하세요

Chris Green 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 1

7일 전: 2

30일 전: 7

전체 시간: 3,302