주요 콘텐츠로 건너뛰기

2016년 9월 16일 출시. Model A1661, A1784, 또는 A1785. 32, 128 또는 256 GB 환경 설정 / 로즈 골드, 금색, 은색, 검정색, 칠흑색 및 (Product)빨간색으로 제공됩니다.

1364 질문 전체 보기

No celluar signal after phone casing swap

I recently swapped over the phone body for my iphone 7 plus however after completing the swap it does not detect signal at any point, it searches and then just says no signal . I have tried doing a DFU reset and checking all connections on motherboard . Any ideas would be appreciated

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

there are always grounding connections to the housing assuming you have made all those connections correctly and the housing is good quality the only explanation is possible damage caused during the change.

Instead of creating more damage I would take the phone to a decent repair shop ask them to check it for you because otherwise you may cause more damage that cant be repaired.

해당 답변은 도움이 되었습니까?

점수 0

댓글 1개:

Are you able to list all the areas where there are grounding connections?

댓글 달기

귀하의 답변을 추가하세요

Isaac Legg 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 38