주요 콘텐츠로 건너뛰기

2014년 9월 19일에 출시된 이 5.5” 스크린 iPhone은 iPhone 6의 큰 버전입니다.

1525 질문 전체 보기

New display causing white flickering at top of screen

Hi,

I am replacing the display assembly on an iphone 6 plus. Everything works as normal however at startup the screen would often flicker and sometimes be unresponsive to touch. To be more accurate the flickering was a white lineor band that would rise and fall from the top of the screen and the display would become unresponsive or delayed..

The top flex cable connector to me feels loose compared to the origional.

Thx.

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

선택된 답변

I would be sure this is a problem with the touch ic , not the screen .It is commonly known as touch disease. try lifting screen up while still on and connected and putting a fair amount of pressure on the main board (at the black area on shield below the screen connectors )with your thumb and see if the touchscreen responds while pressure is on.

if so then afraid you would need to have the touch ic replaced . It is expensive and requires micro soldering skill. Best left to professionals that have carried out this particular repair before .

해당 답변은 도움이 되었습니까?

점수 3

댓글 3개:

Totally agree.

I should have mentioned when I put the original screen back on the problem goes away.

You need to try another screen just in case. Sounds like a defective screen.

댓글 달기

귀하의 답변을 추가하세요

David 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 210