기기를 수리하세요 커뮤니티 상점

Repair and disassembly guides for Epson printer. The company was founded in 1942 as Daiwa Kogyo, Ltd., but merged with another company in 1959 to create Suwa Seikosha Co., Ltd.

622 질문 전체 보기

옵션

Epson L386 reset to factory settings

Hello,

I have an Epson L386 printer, connected to wireless network.

Unfortunately I made a reset to router and now I don't remember my previous password.

So at this point I can't connect my printer to network. I am searching for hours, and

I still haven't figured out how can I reset my printer to factory reset, since it is not connected to network.

Any ideas?

Best regards

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 4
댓글 1개

I have looked everywhere for the reset button on my Edson L386. If you could point out where exactly it is..maybe a photo? I would be grateful.

의

댓글 달기

답변 2개

필터:
가장 유용함 가장 최근 가장 오래된
가장 유용한 답변

옵션

Hello,

When you reset your Epson printer then resetting network setting will remove communication between printer and computer.

For follow these steps:

  • Turn the printer off.
  • press the reset button on the back of the printer.
  • Turn on the printer while continues to hold reset button.
  • After 5 sec it will give the warning for printout.

After printing the warning, the reset printer will go back the on the default IP address.

해당 답변은 도움이 되었습니까?

예 아니요
점수 2

댓글 1개:

where is the RESET button on the BACK ???

의

댓글 달기

옵션
  1. Press the  power button to turn off your product.
  2. Press and hold the  network status button and press the  power button to turn your product back on. The network settings are restored to their factory defaults and your product turns on.

https://files.support.epson.com/htmldocs...

해당 답변은 도움이 되었습니까?

예 아니요
점수 0
댓글 달기

귀하의 답변을 추가하세요

Manos Pervolarakis 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 2

7일 전: 15

30일 전: 61

전체 시간: 6,839