기기를 수리하세요 커뮤니티 상점

Mac Pro는 데스크톱 Mac 시리즈의 2013년 개조판으로 알려져있습니다.

117 질문 전체 보기

옵션

No serial number under About This Mac post swapping the CPU.

Late 2013 MacPro with CPU, RAM, and SSD upgrades. Not my main machine. Just realized that the serial number does not show up. Other than this, the machine runs perfectly. Apple Store offered to replace the logic board in order to be able to use their serialization tool. The logic board is the original and is otherwise fine. Any ideas on how to flash the board to reset the serial number? Or how to get the tool? Thanks.

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 0
댓글 달기

답변 1개

필터:
가장 유용함 가장 최근 가장 오래된

옵션

I'd say take it into a Apple Authorized Service Provider and have them run AST on it. It should, if the serial number hasn't been set, prompt them to serialize the unit. Otherwise, you're likely looking at having to get your hands on the serializer tool. You'd want to locate Blank Board Serializer v 1.1.1 .

해당 답변은 도움이 되었습니까?

예 아니요
점수 0

댓글 3개:

Thanks so much for the response rholcomb3! Can find Blank Board Serializer v 1.1, but not 1.1.1. All of the posts I've read over the last couple of days state that the 2013 Mac Pro can't be re-serialized with what is on the web. Given the prolonged model run, am sure someone has done this. If you have a link to v1.1.1, feel free to point me there. Am a bit hesitant to try to fix this until someone more competent has posted a working solution.

의

...more competent than me that is.

의

as I know if serial no is visible - cannot be put again (different)

P.S. To find out if everything ok with serial - try to send iMessage from it - I could not do this having NO SERIAL no in my iMac 2012 - when serialized it - automatically fixed

의

댓글 달기

귀하의 답변을 추가하세요

William Dwyer 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 3

전체 시간: 610