옵션

Home button flex replaced, touch ID not working

Hi all,

I replaced my home button (long) flex cable and now my touch ID is not working anymore. The home button, the click, is working fine. What could be the problem? The home button is still the original one.

Thanks

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요

점수 0

댓글 달기

게시일: 2018년 5월 2일

옵션

Check both the long home button flex and the short flex on the button itself. Something is broken in that line. It could be a tiny tear in one of the corners or it could be the connectors with a damaged pin. You may need to use magnification as it doesn't take much to cause problems.

If the long flex is damaged, you can replace it. If the Home Button has a damaged flex, it "may" be repairable but generally it is not.

해당 답변은 도움이 되었습니까?

예 아니요

점수 1

댓글 4개:

So a 'China' long flex should also let the touch ID work with an original home button?

Uas 의 2018년 5월 2일

They all come from China :>)

Minho 의 2018년 5월 2일

Okay, thank you. But can a long flex cable let the home button touch id work?

Uas 의 2018년 5월 2일

Yes it can. The only other causes of touch ID not working are if there is a small enough tear in the home button to only affect touch id, components knocked off of the logic board during disconnection, or a defective extension flex (long flex that runs underneath the LCD shield plate.

Robert Garza 의 2018년 5월 2일

댓글 달기

iPhone 6 Plus

Home button flex replaced, touch ID not working

답변 1개

귀하의 답변을 추가하세요