4-inch iPhone released in March 2016 with similar hardware specifications to the 6s. Available in Silver, Space Grey, Gold, or Rose Gold with 16/64 GB storage options. Model A1662 and A1723.

467 질문 전체 보기

Tried to fit new screen

Hi I'm hoping u can help me , I've replaced the screen etc on my sons 'phone and it came on at first but then had loads of lines and gradually no picture?

I have isoprolol if that will help ?

Which parts are a actually the lcd s?

Thank u xxx

Update (05/17/2018)

I've ordered another replacement screen any advice on which parts 2 be careful of or which parts are most delicate? Xx

답변되었습니다! View the answer 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
의견 추가하세요
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12

3개의 답변

선택된 해법

Fading with lines on the LCD is the signal not properly coming from the image control IC on the LCD assembly.

Very likely, either the flex, or the LCD itself is damaged. This could have come from the place you have purchased the parts from (manufacturer defect) or could have happened while fiddling with the part. This is very common for home repair, due to the tiny amound of oressure it takes to cause damage.

There is also a posibility of a loose connection, but it actually far less common than the part being internally damaged.

해당 답변은 도움이 되었습니까?

점수 2

댓글:

Thank u very much for your reply. It was my first attempt at this so it's possible. If I order another have u any tips on where I went wrong or which bits to be careful of? Xx

의 답변

Any tips on how not too damage a new one please ? Which parts are most delicate? X

의 답변

the most delicate area are the flex cables of a new screen. never let them stretch. hold the screen at a 90% angle from the phone while handling the new screen, and never go beyond that. this will keep them from stretching.

While connecting a new screen, always make sure the connectors make a clicking noise as they go in, and dont let the connectors bend if you can avoid it.

의 답변

의견 추가하세요

it could be the connector isnt correctly attached, disconnect the lcd and reattach making sure they clip in properly. remember to disconnect the battery before any screen replacement otherwise you could damage the backlight circuit

해당 답변은 도움이 되었습니까?

점수 1

댓글:

Thank u very much ill try again and see how it goes thank u .

I can see the screen lighting up behind the silver plate if that helps? Xx

의 답변

의견 추가하세요

Are you talking about the horizontal / vertical line artifacts that appear on the screen?

Chances are it's from using a aftermarket iPhone 5s screen. To fix this issue you will need to either use a Aftermarket SE screen, Original 5S or SE screen.

해당 답변은 도움이 되었습니까?

점수 0

댓글:

The lines were horizontal and gradually faded to nothing . I was under the impression it was a genuine iphone SE screen replacement but I followed it step by step ? Xx

의 답변

의견 추가하세요

귀하의 답변을 추가하십시오

Debbie 가/이 대단히 고마워 할 것입니다.
조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 1

전체 시간: 52