Model A1312 / Mid 2010 / 3.2 GHz Core i3 or 2.8 & 3.6 GHz Core i5 or 2.93 GHz Core i7, ID iMac11,3

293 질문 전체 보기

How to reset firmware password on iMac 27

I forget what was my password and I can't remember it, now I did tottaly format my hard drive and because I do have Firmware password I can't install any OS on this machine iMac 27 with i5 CPU intel.

any help how to reset this password?

답변되었습니다! View the answer 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 2

댓글:

Why would you install a firmware password?

의 답변

의견 추가하세요
Fixmas/픽스마스 분위기를 띄우세요
FIXMAS12 코드로 $50 이상 구매시 $12 할인을 받으십시오
Fixmas/픽스마스 분위기를 띄우세요
FIXMAS12 코드로 $50 이상 구매시 $12 할인을 받으십시오

4개의 답변

선택된 해법

Hello Daniel, I'm going to assume you are in fact the legal owner of the iMac and post a link that answers your question. This article refers to a Mini but applies to your computer as well. Read the article and follow the directions and you should be able to use your computer again. I would suggest you save all passwords--you never know when you will need them. Good luck.

http://www.macworld.com/article/145418/2...

해당 답변은 도움이 되었습니까?

점수 2

댓글:

+ Nice article. Thank you for sharing it.

의 답변

의견 추가하세요
가장 유용한 답변

You're absolutely correct sir, that password was entered to protect that Imac from unauthorized access. Your best bet it to take it back to where you bought it from and get it cleared. It's a mid 2010 machine and still under warranty and someone put that password in less than nine months ago. I'm sure you registered it with Apple and they will be able to give you entry to the machine. Just contact them here anywhere in the world: http://support.apple.com/kb/HE57

Please don't get angry with me if the hardware and the software are doing what was intended by Apple and not allowing unauthorized access.

해당 답변은 도움이 되었습니까?

점수 2

댓글:

Aren't you happy that I will not tell someone else that might steal your machine how to access your data?

의 답변

Your answer do not give me answer to my question! Instead you ask instead of answering my question!!

The matter is NOT why I did install Firmware password! This password i already been set it once! I thought it may protect my iMac! And later I didn't even think about it! so that why I forgot what the password was! Until there was no more room in my harddrive and I needed to update my harddrive to a bigger one!

But than I remember that I did once/ long ago install a Firmware password which I no longer remember!! and Coz of this matter the system not allow me to install any OS in this machine!!! Not even when I put back the original harddrive which I already formated and it is totally empty now! But I still can't install any operating system on this machine/ iMac 27.

So again I'm asking the same question!

Is there a way to reset the Firmware password? On a iMac 27 i5 CPU ???

의 답변

Daniel Storm, take it easy. Everyone here understands your frustration but no need to get all angry at people that are trying to assist you. Sometimes more information will help to assist you.

의 답변

의견 추가하세요

Id would think disconnecting the logic board battery would do it.

해당 답변은 도움이 되었습니까?

점수 0
의견 추가하세요

I would think disconnecting the battery from the logic board would do it

해당 답변은 도움이 되었습니까?

점수 0
의견 추가하세요

귀하의 답변을 추가하십시오

Daniel Storm 가/이 대단히 고마워 할 것입니다.
조회 통계:

지난 24시간: 19

지난 7일: 129

지난 30일: 532

전체 시간: 25,351