기기를 수리하세요 커뮤니티 상점

2009년 3월에 소개된 The Mac Pro (Early 2009)는 Intel Nehalem 아키텍처를 Apple의 전문가용 데스크탑 라인에 도입하였으며 미묘하게 재설계된 내부는 2010 및 2012 CPU 업데이트를 통해 소개되었습니다.

201 질문 전체 보기

옵션

Upgrading CPU's Riser board throws red LED after installing X5690

Hi,

I upgraded my Firmware to 5,1 on a 2009 MacPro. The computer boots fine with the dual quad core processors. But when I install the X5690 3.46ghz chips - it throws the red led and doesn't chime post, no video (page 34 of the MacPro early 2009 manual).

I have tried booting with different OS versions, tried a second Riser Board, reset smu. Confirmed boot version B03.

I have put the X5690 in a single core Riser Board and it boots fine.

Could it be the chips don't work as pairs?

Thanks

Update (05/23/2018)

Block Image

This was supposed to be attached

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 0
댓글 달기

답변 1개

필터:
가장 유용함 가장 최근 가장 오래된

옵션

Wxxx series don't work in pairs - Xxxx yes

does CPU (but put as a SINGLE) works in both sockets? Just want to eliminate faulty CPU

해당 답변은 도움이 되었습니까?

예 아니요
점수 0

댓글 1개:

other problem can be - I gues You put them with..... lids - as 2009 got lidless - put 3 M4 (2.1-2.2mm thickness) washers on each pin - tide screws with usual force.

I hope you did not used usual force to do screws without washers as you crushed socket or...... as I've purchased non working dual cpu tray months ago and it had...... BURNED / melted TOGETHER 2 socket pins - which I saw them ONLY UNDER full zoom photo from my iPhone!!!!!!

의

댓글 달기

귀하의 답변을 추가하세요

Paul 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 151