주요 콘텐츠로 건너뛰기

2015년 9월 25일 출시. Model A1688/A1633. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 6, 64, 또는 128GB / 은색, 금색, 스페이스 그레이 및 로즈 골드로 제공하였습니다.

2688 질문 전체 보기

Backlight working sometimes, only on startup

I've replaced the screen on my Iphone 6S because it was broken. at first all seamed fine but after a few minutes i couldnt get my screen to turn on. i Researched and i found out that it could be a blown backlight filter.

The strange thing however is that when im charging my phone, or when i start it up again after a hard reset its showing the battery sign or apple logo with full beam.

Do you guys have an idea how i can solve this issue?

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

선택된 답변

Either you have a defective screen or the backlight circuit needs to be diagnosed and fixed by someone that does microsoldering / board level repairs on iPhones.

해당 답변은 도움이 되었습니까?

점수 2

댓글 2개:

I already tried a different screen. and the original with the crack in it. the issue is on all the screens. couldn't it be a software issue?

If you think it's a software issue you can try restoring the phone but you need to backup the phone before doing so if you have data you want to keep on the phone.

댓글 달기

귀하의 답변을 추가하세요

Joost V 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 6

전체 시간: 102