주요 콘텐츠로 건너뛰기

2015년 9월 25일 출시. Model A1687/A1634. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 6, 64, 또는 128GB / 은색, 금색, 스페이스 그레이 및 로즈 골드로 제공하였습니다.

1041 질문 전체 보기

iPhone 6s Plus Screen Replacement > Cameras not working

Hi all,

Finished a Screen Assembly replacement on a 6s+, I can see that I have torn a small section of the Front Camera Assembly.

Earpiece speaker, front camera and rear cameras aren't working.

I concede that the front and earpiece speaker should be affected by this, but not 100% sure why the rear isn't.

Could this be a related issue? I'm planning on getting a new Front Camera Flex to replace the broken one but a little stumped as to why the rear has been taken off line.

Any wisdom appreciated.

Cheers

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0

댓글 2개:

try just connecting the lcd and digitiser to see if the back camera works

I would double check to see if your rear camera flex cable is connected to the logicboard. The front flex cable has no impact on the function of the rear camera

댓글 달기

답변 1개

Have you check the rear camera connection it is right next to the connection for the proxy cable for the ear speaker, face camera, and proximity sensor.

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

귀하의 답변을 추가하세요

Dan 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 80