주요 콘텐츠로 건너뛰기

처리 속도가 빨라진 iPhone 3G 개선 버전. 이 기기의 수리는 3G와 유사하며 간단한 스크루드라이버, 비집는 도구가 필요합니다. 모델 A1303 / 16GB 또는 32GB 용량 / 검정 또는 흰색 플라스틱 뒷면.

1500 질문 전체 보기

iPhone3GS component metallic fabric-like pad NEAR connector4?

Did anyone fix the old iPhone 3GS.

I know its old but mine was still functional until I tried to change the battery... and this pad split and part fell off. It is a metallic fabric-like silver pad beside connector 4. It is clearly visible as a rounded cornered rectangle about 1cm by 0.5cm, adjacent to connector numbered 4 in the ifixit teardown (pls see link below). It left a layer in place but shed a layer, looks metallic, what fell off conducts electricity, so I presume it is important to re-attach it for heat and/or electricity?

Please, does anyone know what it is for? And how to re-attach it? Or what harm if operate without it?

Silver pad adjacent to connector 4 in iPhone3GS teardown

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 2개

가장 유용한 답변

Just put it there. It's some kind of cushion to press the FPC cables down, if there is no exposed copper underneath it, conductivity is not important.

해당 답변은 도움이 되었습니까?

점수 1
댓글 달기

Block Image

Are you referring to this?

해당 답변은 도움이 되었습니까?

점수 0

댓글 1개:

No, please see the linked URL to see connector 4 inside the phone

댓글 달기

귀하의 답변을 추가하세요

Mak 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 40