주요 콘텐츠로 건너뛰기

Released June 2014, identified by model number B051.

33 질문 전체 보기

Wires lifted-up on BEATS SOLO 3 - I need the wiring diagramm

Hello,

On my Headphone BEATS , Solo 3 :

The soldered wires , on the jack side, have been pulled. I do not know which wire (green, blue, red, pink, pink/pink) should be soldered on which plot (8, 9, ....12) ?

Look at the picture.

A picture of a still soldered device would help me a lot !

Many Thanks

Mise à jour (08/07/2018)

now with the picture , hopefully !

Block Image

Additionnal question; is it a real or a fake ?

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 1개

hello everyone.if some of u have.ı need electronic diagram of beats solo 3 wireless headset.hugs from turkey.thanks in advance

댓글 달기

답변 2개

가장 유용한 답변

Hi @olipoul ,

Regarding whether your headset is real or fake. Does your speaker look like the one in the image below?

Here’s some links to two videos, video1 and video 2 showing the teardown of a Beats Solo 3 headset.

Here’s an image (enlargement taken from video one) showing the wiring connections. Admittedly it is not as good as your picture but hopefully you may be able to grab a better picture from the video and enlarge it even more to get a better view of the wiring.

Block Image

(click on image to enlarge for better viewing)

Hopefully it may be of some help.

해당 답변은 도움이 되었습니까?

점수 2

댓글 1개:

Hi Jayeff, Thanks for your answer; I knew these videos. I did not want to open the rest for the moment. In any case Thanks

댓글 달기

Hi Oliver, looking out your picture i think those are fake, you wrote at the title beats solo 3 and now they are made by apple, these is a picture of the real ones main board.

https://rover.ebay.com/rover/0/0/0?mpre=...

I wish you the best of luck!!

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

귀하의 답변을 추가하세요

Olivier Poulat 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 7

30일 전: 58

전체 시간: 3,257