주요 콘텐츠로 건너뛰기

Apple iPhone 5s는 2013년 9월 10일에 발표되었습니다. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 16, 32, 또는 64GB / 은색, 금색 및 스페이스 그레이.

3531 질문 전체 보기

My iPhone stop working after disassembled and assembled it

I disassembled my iPhone and I changed the battery then assembled it back and i turned the iPhone On but it show only Apple logo.. i checked all the connection to make sure that i connect everything properly but it still showing Apple logo. I took it to repairing shop and they tried to repair it but they couldn't..they told me that the motherboard is damage... please i want to know the cause of it. So I will not make the mistake next time

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

선택된 답변

I don't think anybody can tell you for sure what you might have damaged except the repairing shop where they had the chance to see it..there are very good technicians answering this forum but nobody gifted with ESP AFAIK ;) My first guess, being an iPhone 5s, is that by lifting the battery connector you might have lifted a tiny component sitting next to it. With a good light source and magnification you can examine the close proximity, you'll see some small capacitors and maybe two shiny solder pads where one capacitor was soldered before being lifted.

해당 답변은 도움이 되었습니까?

점수 2
댓글 달기

귀하의 답변을 추가하세요

Kingsley 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 39