주요 콘텐츠로 건너뛰기

High performance tablet computer released by Apple on November 11, 2015. Model A1584.

130 질문 전체 보기

Home button damaged at ZIF connector

I needed to replace my battery. The screen cracked while trying to get it off, so I ordered a screen from here along with the necessary tools. After replacing the battery and getting ready to put the new screen in place, I realized the new screen didn't have a home button. I made an effort to remove the button assembly from the old screen to transfer to the new screen, however there was a mishap at the ZIF connector.

A chunk came off the area where it connects to the screen- the new screen has something tangible that the old screen no longer has. the cable was intact, but the connector was damaged. As I inspected the connector, holding it in a pair of tweezers, it broke in half.

I was looking online for a replacement, assuming this might be necessary, and all I see are aftermarket parts that indicate the biometrics either won't work or may not work. My question is just how severe is the extent of my damage and can I get by with most of my original part or does the whole thing need to be replaced? I really want to maintain Touch ID/biometric features. How badly am I screwed and if I need parts, where do I need to get them?

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

선택된 답변

Do you mean this connector (Step 34)?

You can replace that connector via a micro-soldering repair but this is not a DIY repair unless you have lots of experience. If the Home Button Flex or button isn't damaged, then everything should be back to normal once repaired.

해당 답변은 도움이 되었습니까?

점수 2
댓글 달기

귀하의 답변을 추가하세요

Scott Cherry 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 4

30일 전: 19

전체 시간: 716