기기를 수리하세요 커뮤니티 상점

2014년 9월 19일에 출시된 이 4.7” 스크린 iPhone은 iPhone 6 Plus의 작은 버전입니다. 모델 번호 A1549, A1586 및 A1589로 식별됩니다.

4994 질문 전체 보기

옵션

iPhone does not want to turn on

I got a IPhone 6 here that does not want to turn on.

I can confirm the battery is still good because when I move the battery over to another IPhone it starts right up.

Battery does have juice in it, it is not dead.

The LCD is bad however but it should still turn on.

I don't think it's black-light damage because the phone should turn on if it was.

I've tried:

  1. Holding Power button and home button for 1+ minutes.
  2. Connecting to a Computer, (Computer does not detect phone)
  3. Use a brand new screen and LCD, still no luck.
  4. Left it to charge for more than 1 hour

Any ideas?

I appreciate it!

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 0
댓글 달기

답변 1개

필터:
가장 유용함 가장 최근 가장 오래된
가장 유용한 답변

옵션

Blown U2 IC is culprit. need to have a micro solder technician replace the tristar!

해당 답변은 도움이 되었습니까?

예 아니요
점수 1

댓글 4개:

What can cause it to blow ? Isn't the U2 IC chip responsible for charging?

의

It is responsible for the charging, data connection to the computer and providing information to the pmic chip. Using third party cheap cables will damage this chip.

You experience not charging, not turning on... very likely the U2 IC but could also be the a vcc main short somewhere or the PMIC chip blown. The only way to know is to have good use of multimeter and board schematics to pin point the problem. We do this daily and see vcc main shorts and u2 shorts all the time.

의

Also another thing to note need to look under the metal shields for liquid damage on logic board IC components

의

How does a cheap cable cause the chip to blow? Wouldn't it be the charger's fault rather than the cable?

의

댓글 달기

귀하의 답변을 추가하세요

Richard Danh 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 58