Change only ear speaker

I don't have an iPhone X in front of me but the proximity sensor is soldered onto the ear speaker (the two gold pads). You should order an ear speaker that has the proximity sensor pre-installed, like this one here.

UPDATE

Currently there are all kinds of issues regarding Face ID and the Ambient Light Sensor. If these things are important, then you need to go to Apple to have the whole screen assembly replaced.

해당 답변은 도움이 되었습니까?

예 아니요

점수 2

댓글 3개:

Thank you. But what about face id problem. I read on the internet after change all of that , will be problem with Face ID.

Michal Petras 의 2018년 7월 30일

According to my research, in the event I would have to do this (not personally tested yet), there are some integrations on the flex cable. If you change the cable out, it may (because I haven't tested it myself) affect the Face ID. A lot of things I've seen online are people soldering out the damaged parts from the flex and replacing them. The other issue is how sensitive the cable is.

So if someone has an issue with the Face ID after display replacement, it's because you need the original camera/speaker flex and you need to inspect for damages, because that piece is delicate.

If any of my brethren on here have worked on these devices and have seen otherwise, please advise with details.

Good Luck

Juax 의 2018년 7월 30일

Currently there are all kinds of issues regarding Face ID and the Ambient Light Sensor. If these things are important, then you need to go to Apple to have the whole screen assembly replaced.

I was just answering your question about how to connect the two pieces.

Minho 의 2018년 7월 30일

댓글 달기

Thank you. But what about face id problem. I read on the internet after change all of that , will be problem with Face ID. — Michal Petras
According to my research, in the event I would have to do this (not personally tested yet), there are some integrations on the flex cable. If you change the cable out, it may (because I haven't tested it myself) affect the Face ID. A lot of things I've seen online are people soldering out the damaged parts from the flex and replacing them. The other issue is how sensitive the cable is.

So if someone has an issue with the Face ID after display replacement, it's because you need the original camera/speaker flex and you need to inspect for damages, because that piece is delicate.

If any of my brethren on here have worked on these devices and have seen otherwise, please advise with details.

Good Luck — Juax
Currently there are all kinds of issues regarding Face ID and the Ambient Light Sensor. If these things are important, then you need to go to Apple to have the whole screen assembly replaced.

I was just answering your question about how to connect the two pieces. — Minho

iPhone X

Change only ear speaker

답변 1개

귀하의 답변을 추가하세요