주요 콘텐츠로 건너뛰기

2012년 9월 12일에 발표된 여섯 번째 Apple iPhone입니다. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 16, 32, 또는 64GB / 검정색 또는 흰색으로 제공하였습니다.

2521 질문 전체 보기

After replacing battery, touch screen does not work

Hi

I used your iPhone 5 battery replacement kit and seemed to do everything fine during the steps. Now there is no sensitivity on the screen, can’t touch to select top row of icons, can’t swipe to turn off, etc. Just in the top part of the screen. Any ideas what has gone wrong?

Thanks

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

선택된 답변

"Just in the top part of the screen"?

You could try re-seating it but that might be a bad part

해당 답변은 도움이 되었습니까?

점수 0

댓글 2개:

Hi, thanks for your suggestion. I tried resetting but still did not fix. Unfortunately the touch screen is even worse now and most of the sensitivity, or ability to touch icons or swipe, has gone from most of the screen. Or I touch an icon on the bottom row to open an app, and it opens an icon on the top row!

If you still have it, you could try reconnecting your old screen to see if it still works for touch (assuming you replaced it because it was cracked). If it works ok then you might have gotten a replacement screen and in that case I'd contact the seller to discuss warranty.

There's really only two things it could be - either the screen or the logic board. If you can rule out the screen, then you could probably replace the device for less than it would take to have someone repair the logic board

댓글 달기

귀하의 답변을 추가하세요

K G 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 68