주요 콘텐츠로 건너뛰기

2017년 11월 4일 출시. A1865, A1901. GSM 또는 CDMA / 64 또는 256 GB / 은색 또는 스페이스 그레이. ("iPhone 10"으로 발음합니다.)

1196 질문 전체 보기

Best tips to use for micro soldering on the Hakko FX888D?

Hi, Everyone,

I am a brand spanking new newbie when it comes to electronics repair but i'm very excited to learn board repair. I purchased the Hakko FX888D to practice soldering on dummy boards and will probably continue to use it for some time.

My question: What are the best tips to use with this station for micro soldering? A part number would be great or a link on ebay even better!

Also what do you guys think about this hot air station for a beginner?: https://www.ebay.ca/itm/152922627479

Thank you so much!

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 3개

선택된 답변

Don't know at which Hakko you looked at, PatsyF, but it's not a cheap manufacturer. On the contrary it's a very reputable one, among other brands that were on the market well before "microsoldering craze", like Weller, Ersa, Pace, JBC, Metcal, just to mention a few. Be very careful where you buy, as it's well known there are clones around. Also consider there's quite a difference between a simple soldering iron and a soldering station..performance and prices can't really be compared.

해당 답변은 도움이 되었습니까?

점수 1

댓글 2개:

Hi thanks for the reply.

The hakko soldering station mentioned is £120 on eBay. Seems cheaper than most of the others I was thinking about getting. That's why I was wondering if it is up to the task for mobile phone repairs / microsoldering.

The tip came in at an extra £12.

Is there anything you would recommend that won't bust the bank arbaman?

Thanks again.

I would recommend a reputable seller for such a purchase, on that platform after 60 days if any problem arises you are on your own. On top of that a Hakko for that price would probably be either a clone or unsuitable for microsoldering use. You 'll have to look for a reliable station, that's one of the main tools you'll be using every day. It should be handy, lightweight, tips should be easily replaceable and you'll need a few to start with, I'd say 0.2/0.4/0.7/ 1mm are all more or less indispensable for phone repairs. You will start having suitable stations from reliable manufacturers around 200/300 $, your bank account should survive that. I have an Ersa i-con Nano, great small station, the soldering iron is more like a pencil than an iron, works like a charm. Tips are a bit expensive. But I'm sure any of the other manufacturers will have a good station to start with for a reasonable price..google around, make comparisons, read opinions, avoid cheap chinese crap ;)

댓글 달기
가장 유용한 답변

the hot air station is fine as for tip i would say T18-C05

해당 답변은 도움이 되었습니까?

점수 2
댓글 달기

I think learning to microsolder on cheap crappy hot air stations is like trying to put out a fire with a hose that is alternating fast and slow water flow——way harder than using a solid affordable station like the Quick861dw that is the clear winner for value hot air rework.

해당 답변은 도움이 되었습니까?

점수 0

댓글 2개:

Jessa, thank you for replying to me. Love your videos and you are the reason I am now interested in electronics. I will take your advice and just save for a better set up.

Is the hakko station good enough for microsoldering work on iPhones etc. It looks a bit cheap?

Asking as I'm looking for something myself.

Thanks

댓글 달기

귀하의 답변을 추가하세요

Tired 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 12

전체 시간: 1,484