주요 콘텐츠로 건너뛰기

2015년 9월 25일 출시. Model A1688/A1633. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 6, 64, 또는 128GB / 은색, 금색, 스페이스 그레이 및 로즈 골드로 제공하였습니다.

2683 질문 전체 보기

iPhone 6S rear camera and flash issue (microsoldering)

Hello, i have iPhone 6S with minimal water damage. Rear camera and flashlight wont work. Tried changing camera.

After inspection i saw water damage near camera controller and FL3202 was completely burnned.

Changed U3200, C3210, FL3202, U4100

Camera and flash still doesnt work. What should i do now? have anyone faced this problem?

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

선택된 답변

Check to make sure you have continuity between the PP_VCC_MAIN that goes to FL3202 and the PP_VCC_MAIN that powers the rest of the board. I’ve seen cases where the inner trace that connects the CPU area with PP_VCC_MAIN and the camera area gets vaporized internally.

해당 답변은 도움이 되었습니까?

점수 2
댓글 달기

귀하의 답변을 추가하세요

Madness 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 1

전체 시간: 202