주요 콘텐츠로 건너뛰기

2015년 9월 25일 출시. Model A1688/A1633. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 6, 64, 또는 128GB / 은색, 금색, 스페이스 그레이 및 로즈 골드로 제공하였습니다.

2690 질문 전체 보기

iPhone got a few drops of water in now lcd's wont work

my iphone 6s got a few drops of water in it , i disconnected battery and left it to dry for 3 days , switched back on , worked for a min , then lcd turned off , so i got a replacement screen tried it on another iphone 6s first , then plugged it in to the water damaged phone and no display , but the phone works , i restored it via itunes , etc can hear it ringing etc , just lcd will not work , maybe damage to motherboard , but where do i look , thanks for any help

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

Shine a bright LED flashlight at the screen and boot it up to check for a bad backlight. It seems likely that your backlight fried. This is not a bad repair as far as board work goes, but not one to attempt unless you are well versed in micro soldering and have a good setup for it.

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

귀하의 답변을 추가하세요

shaz 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 31