No Power, No Stndby light, when the main brd is unplugged back light

Question

Samsung Television

Repair guides and support for your Samsung TV.

2609 질문 전체 보기

Roddy Kelley @roddykelley

평판: 11

게시일: 2018년 8월 7일

옵션

No Power, No Stndby light, when the main brd is unplugged back light

Okay so I have a Samsung 55 in model number un55ES7100XZA . The television set was power cycling every couple of minutes now there is no standby and no power to the TV after replacing the power supply still no changes but when I remove the cable from the power supply to the mainboard my back lights come on. I don't want to continue to throw Parts at it because the main board is extremely hard to find is this a common issue for these TVs

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요

점수 0

댓글 달기

답변 3개

선택된 답변

Abrsvc @abrsvc

평판: 4.1k

ABR Services

3

2

게시일: 2018년 8월 8일

옵션

It is unusual for a standby light to be affected by a problem within the set that is not related to the power board. Since removal of the connector to the main board allows the back light to work, suggests that the problem is related to the main board. This is not a common error as far as I know. Was this set involved in a power surge or power outage recently?

There is a repair service for the main board that may work for you. See the link below:

https://www.ebay.com/itm/Repair-Service-...

Dan

해당 답변은 도움이 되었습니까?

예 아니요

점수 1

댓글 1개:

Thanks Dan I believe you are right . I found a replacement board that may work . I've been in contact with that shop on ebay that you mentioned about a flex cable issue and I've desided to send them all my board work from her on out. Thanks and I'll let ya know how it goes.

Roddy Kelley 의 2018년 8월 9일

댓글 달기

Thanks Dan I believe you are right . I found a replacement board that may work . I've been in contact with that shop on ebay that you mentioned about a flex cable issue and I've desided to send them all my board work from her on out. Thanks and I'll let ya know how it goes. — Roddy Kelley

oldturkey03 @oldturkey03 평판: 781.7k 1.1k 893 2.3k · Answer 1 · 2018-08-08T18:39:42-07:00

가장 유용한 답변

oldturkey03 @oldturkey03

평판: 781.7k

1.1k

893

2.3k

게시일: 2018년 8월 8일

옵션

@roddykelly “there is no standby “ and if you do not have any standby voltage on your main board, it is the main board that has failed. That is most likely the reason why the main boards are not readily available.

해당 답변은 도움이 되었습니까?

예 아니요

점수 2

댓글 1개:

Thank you, I've just started tinkering with tvs and every one is a new animal, I appreciate that folks can take the time to answer questions and lend a hand. Yall rock

Roddy Kelley 의 2018년 8월 9일

댓글 달기